各国标准汇总

N　|　 EN　|　 GB　|　 ISO　|　 JIS　|　 NF　|　 DIC

编号DIN 267-13-2007DIN 267-2-1984DIN 267-24-2007DIN 267-26-2005DIN 267-27-2004DIN 267-28-2004DIN 267-29-1993DIN 267-30-2001DIN 267-6-1975DIN 29895-1984DIN 29895-2-1989DIN 3132-1984DIN 3133-1984DIN 3134-1984中文名称紧固件.技术规范.第13部分:在-200℃～700℃温度范围使紧固件.交货技术条件.结构和尺寸精度紧固件.交货技术条件.第24部分:不带规定验证载荷值的紧固件.技术规范.第26部分:螺栓连接件用锥形弹簧垫圈紧固件.带粘附层的钢制螺钉、螺栓和螺柱技术规范紧固件.第28部分:带压紧层的钢制螺钉、螺栓和螺柱.技紧固件.在-200℃～+700℃温度范围使用的螺栓连接件的紧固件.交货技术条件.第30部分:特性等级为10.9的米制紧固件和类似零件.产品等级F的表面粗糙度和公差技术航空和航天.可选择的紧固件材料航空航天.可选择的紧固件材料.第2部分:实心铆钉肘节式紧固件.带短支撑板的击出部肘节式紧固件.带加长支撑板的击出部肘节式紧固件.带和不带锁紧孔DIN 34804-2002紧固件.黑色表面的外观变化DIN 4000-160-2007产品性能制表规划.第160部分:带内螺纹紧固件DIN 4000-161-2007DIN 43835-1971DIN 48069-1-1977产品性能制表规划.第160部分:带外螺纹紧固件指示仪表的固定.紧固件、壳体锥铆钉、安装配置架空电力线用无保护紧固件的双眼航空航天系列.横向负载条件下紧固件的锁定特性的动态试验(振动试验)航空航天.带击头的紧固件用壁厚为0.25mm的衬套航空航天.击头紧固件用壁厚为0.5mm的套筒航空航天.埋头紧固件用壁厚为0.25mm的套筒航空航天.埋头紧固件用壁厚为0.5mm的套筒航空航天.带减径埋头的紧固件用壁厚为0.25mm套筒航空航天.小埋头紧固件用壁厚为0.5mm的衬套航空航天.紧固件用衬套.技术规范DIN 65151-2002DIN 65428-1987DIN 65429-2002DIN 65430-2002DIN 65431-2002DIN 65433-2002DIN 65434-1987DIN 65435-1989DIN 65485-1993航空航天.结构用紧固件.旋转的紧固件的机械特性.旋转的紧固件总成航空航天.结构用紧固件.旋转紧固件的机械特性.压力密封型紧固件总成航空航天.结构用紧固件.旋转紧固件.沉头螺桩航空航天.结构用紧固件.旋转紧固件.安装尺寸航空航天.结构和非结构用紧固件.旋转紧固件.沉头垫圈航空航天.结构紧固件.旋转紧固件.紧固件插孔DIN 65486-1993DIN 65487-1993DIN 65488-1993DIN 65489-1993DIN 65492-1993DIN 65493-1993航空航天.结构紧固件.旋转紧固件.压力密封式紧固件插孔DIN 68163-1982装配木托盘的紧固件.钉子DIN 6885-1-1968无锥形作用的传动型紧固件.平行键、键槽、深度型式无锥形作用的传动型紧固件.机床用平行键、键槽、深度型式.尺寸和用途无锥体作用的驱动式紧固件.浅插入型直销键.尺寸和用途锥度驱动应力型紧固件.斜键、键槽、尺寸和应用锥度驱动应力型紧固件.弯头斜键、键槽、尺寸和应用不带键锥度的传动式紧固件.半圆键.尺寸和应用无锥度连接的驱动式紧固件.直行键.计算和设计汽车和挂车的盘式车轮.柱螺栓定心的紧固件汽车和挂车用辐板式车轮.第3部分:轮毂孔定心附件用紧固件.欧洲标准.综述紧固件.术语.术语的拼写.缩写DIN 6885-2-1967DIN 6885-3-1956DIN 6886-1967DIN 6887-1968DIN 6888-1956DIN 6892-1998DIN 74361-2-1982DIN 74361-3-1979DIN 918 Bb.3-2005DIN 918-1979DIN 969-1997DIN CEN/TS 15087-2006DIN EN 10269 Berichtigung1-2006DIN EN 10269 Berichtigung2-2007DIN EN 10269-2006DIN EN 1075-2000DIN EN 12512-2005DIN EN 12549-1999DIN EN 13271-2004DIN EN 13446-2002DIN EN 1382-2000DIN EN 1383-2000DIN EN 1414-2000DIN EN 14250-2005DIN EN 14831-2005DIN EN 20225-1992螺纹紧固件.轴向负荷疲劳试验.试验方法和试验结果评定屋顶用已装粘土和混凝土嵌合瓦片的抗隆起性测定.机械紧固件的试验方法.德文版本CEN/TS 15087-2005具有规定高温和/或低温性能的紧固件用钢和镍合金专用高温和/或低温性能的紧固件用钢和镍合金具有规定高温和/或低温性能的紧固件用钢和镍合金(包括修改件A1-2006和技术勘误Ber 1-2006-10 + Ber 2-2007-木质构件.试验方法.金属板冲压紧固件连接接头木结构.试验方法.机械紧固件接头的循环试验声学.紧固件安装工具的噪声测试规范.工程法木制紧固件.连接件滑动模数和特性承载力木基板材.紧固件拔出能力的测定; 德文版本 EN木结构.试验方法.木制紧固件的抗拔出力.德文版本木结构.试验方法.木制紧固件的楔入阻力接触锁紧紧固件.后续试验的循环过程(包括补充件A1,2000)木制结构.装配有穿孔金属板紧固件的预制结构构件的生产要求紧固件.上紧性能.扭矩/角度简化试验法紧固件.螺钉、螺柱和螺母.尺寸符号和标示(ISO 225-83)DIN EN 20273-1992DIN EN 20898-2-1994DIN EN 20898-7-1995DIN EN 26157-1-1991DIN EN 26157-3-1991DIN EN 26891-1991DIN EN 28839-1991DIN EN 28970-1991紧固件.螺栓和螺钉的间隙孔(ISO 273-1979)紧固件的机械性能.第2部分:有规定检验载荷值的螺母.粗牙螺纹紧固件的机械性能.第7部分:公称直径为 1 mm - 10 mm的螺栓和螺钉的扭力试验和最小扭矩 (ISO 898-7:1992);紧固件.表面缺陷.符合一般要求的螺栓、螺钉和螺柱(ISO 6157-1-88)紧固件.表面缺陷.特殊要求用螺栓、螺钉和螺柱木结构.用机械紧固件进行的连接.测定强度和变形特性的一般原理.(ISO 6891-83)紧固件的机械性能.有色金属制造的螺栓、螺钉、螺柱和螺母木结构.用机械紧固件连接的试验.对木材密度的要求(ISO 8970-88)DIN EN 383-2007DIN EN 4174-2006木结构.试验方法.测定榫型紧固件的嵌入强度和基础参数航天航空系列.阳极电镀或铬酸盐处理铝合金2024米制系列、连接模压锁紧凹头紧固件DIN EN 50180 Bb.2-2001DIN EN 792-1-2001充油变压器用1kV-36kV及250A-3.15kA衬套.结构紧固件手持非电动工具.安全要求.第1部分:非螺纹机械紧固件的装配动力工具DIN EN 792-13-2001DIN EN 792-6-2001手持非电动工具.安全性要求.第13部分:紧固件扳拧工具手持非电动工具.安全要求.第6部分:螺纹紧固件用装配动力工具木构件紧固件.木构件的连接件规范（包括勘误AC-2000)紧固件.非电解用锌片覆层紧固件.热浸镀锌涂层DIN EN 912-2001DIN EN ISO 10683-2001DIN EN ISO 10684-2004DIN EN ISO 10964-1997DIN EN ISO 1120-2002粘合剂.螺纹紧固件上厌氧粘合剂抗扭强度测定传送带.机械紧固件强度测定.静态试验方法 (ISO1120:2002); 德文版本 EN ISO 1120:2002托盘连接件试验方法.第1部分:托盘用钉子、其它榫钉型紧固件和U形钉的抗弯曲测定DIN EN ISO 12777-1-1996DIN EN ISO 15330-2000DIN EN ISO 16047-2005DIN EN ISO 16048-2003DIN EN ISO 16426-2003紧固件.检测氢脆用预荷载试验.平行支承面法紧固件.扭矩/夹持力试验耐腐蚀不锈钢紧固件的钝化处理紧固件.质量保证体系DIN EN ISO 3269-2000紧固件.验收检查DIN EN ISO 3506-1-1998DIN EN ISO 3506-2-1998耐蚀钢紧固件的机械性能.第1部分:螺栓,螺钉和螺柱耐蚀钢紧固件的机械特性.第2部分:螺母耐蚀钢紧固件的机械特性.第3部分:不受拉应力的止动螺钉和类似的紧固件耐腐蚀不锈钢紧固件的机械特性.第4部分:攻丝螺钉紧固件.电镀层(ISO 4042:1999)紧固件.ISO米制外螺纹零件末端紧固件公差.第1部分:螺栓、螺钉和垫圈和螺母.产品等级A、B和C紧固件公差.第3部分:螺栓、螺钉和螺母用平垫圈.产品等级A和C紧固件.表面缺陷.第2部分:螺母碳钢和合金钢制紧固件的机械性能.第1部分:螺栓,螺钉碳钢和合金钢制紧固件机械性能.第5部分:非拉伸应力碳钢和合金钢制紧固件的机械性能.第5部分:非拉伸应紧固件机械性能.第6部分:带规定试验负荷的螺母.细牙紧固件.螺栓、螺钉、螺母和附件.术语和名称紧固件.六角制件的对边宽度航空和航天.宇航结构用紧固件.双六角(12角)扳手外形技术图样.紧固件组装简化表示法.第1部分:一般原理技术图样.紧固件组装简化表示法.第2部分:航空航天设备用铆钉航空和航天.紧固件.螺栓和螺钉的形状和位置公差.等同采用 ISO 7913-1986航空航天.紧固件.螺母的形状和位置公差紧固件.螺栓、螺钉、螺柱和螺母的一般要求中文名称DIN EN ISO 3506-3-1998DIN EN ISO 3506-4-2003DIN EN ISO 4042-2001DIN EN ISO 4753-2000DIN EN ISO 4759-1-2001DIN EN ISO 4759-3-2000DIN EN ISO 6157-2-2004DIN EN ISO 898-1-1999DIN EN ISO 898-5DIN EN ISO 898-5-1998DIN EN ISO 898-6-1996DIN ISO 1891-1979DIN ISO 272-1979DIN ISO 4095-1980DIN ISO 5845-1-1997DIN ISO 5845-2-1997DIN ISO 7913-1986DIN ISO 8788-1988DIN ISO 8992-2005编号英文名称Fasteners - Technical specifications - Part 13:Fasteners; technical delivery conditions; designFasteners - Technical delivery conditions - PartFasteners - Technical specifications - Part 26:Fasteners - Part 27: Steel screws, bolts and studsFasteners - Part 28: Steel screws, bolts and studsFasteners; product grades for parts for boltedFasteners - Technical delivery conditions - PartFasteners and similar parts; technicalAerospace; alternative materials for fastenersAerospace; alternative materials for fasteners;Toggle-type fasteners; salient, with short baseToggle-type fasteners; salient; with elongated baseToggle-type fasteners; with and without lockingFasteners - Change of appearance of blacksurfacesTabular layout of product properties - Part 160:Fasteners with external threadTabular layout of product properties - Part 161:Fasteners with internal threadFastening for indicating instruments; fasteningcomponent, cone-rivets at the case, mountingDouble eyes without protective fitting attachment,for overhead power linesAerospace series - Dynamic testing of the lockingcharacteristics of fasteners under transverseloading conditions (vibration test)Aerospace; sleeves; wall thickness 0,25 mm, forfasteners with protruding headAerospace - Sleeves, wall thickness 0,5 mm, forfasteners with protruding headAerospace - Sleeves, wall thickness 0,25 mm, forfasteners with countersunk headAerospace - Sleeves, wall thickness 0,5 mm, forfasteners with countersunk headAerospace - Sleeves, wall thickness 0,25 mm, forfasteners with reduced countersunk headAerospace; sleeves; wall thickness 0,5 mm, forAerospace; sleeves for fasteners; technicalspecificationAerospace; fasteners for structural application;rotary fastener, mechanical properties; rotaryAerospace; fasteners for structural application;rotary fasteners, mechanical properties; rotaryfastener, assembly, pressure-tightAerospace; fasteners for structural application;rotary fasteners; stud with countersunk headAerospace; fasteners for structural application;rotary fasteners; installation dimensionsAerospace; fasteners for structural and non-structural applications; rotary fasteners;Aerospace; fasteners for structural application;rotary fasteners; receptacleAerospace; fasteners for structural application;rotary fasteners; receptacle, pressure-tightFasteners for assembling timber pallets; nailsDrive Type Fastenings without Taper Action;Parallel Keys, Keyways, Deep PatternDrive Type Fastenings without Taper Action;Parallel Keys, Keyways, Deep Pattern forMachine Tools, Dimensions and ApplicationDrive Type Fastenings without Taper Action;Parallel Keys, Shallow Pattern, Dimensions andApplicationStressed-type Fastenings with Taper Action; TaperKeys, Keyways, Dimensions and ApplicationStressed-type Fastenings with Taper Action; TaperKeys with Gip Head, Keyways, Dimensions andApplicationDrive Type Fastenings without Taper Action;Woodruff Keys, Dimensions and ApplicationDrive type fastenings without taper action -Parallel keys - Calculation and designDisc wheels for motor vehicles and trailers;fasteners for stud centringDisc wheels for motor vehicles and trailers;Fasteners - European Standards - SurveyFasteners; Terminology; Spelling of terms;Threaded fasteners - Axial load fatigue testing -Test methods and evaluation of resultsDetermination of the uplift resistance of installedclay and concrete interlocking tiles for roofing -Steels and nickel alloys for fasteners withspecified elevated and/or low temperatureSteels and nickel alloys for fasteners withspecified elevated and/or low temperatureSteels and nickel alloys for fasteners withspecified elevated and/or low temperatureTimber structures - Test methods - Joints madewith punched metal plate fasteners; GermanTimber structures - Test methods - Cyclic testingof joints made with mechanical fasteners; GermanAcoustics - Noise test code for fastener drivingtools - Engineering method; German version ENTimber fasteners - Characteristic load-carryingWood-based panels - Determination of withdrawalTimber structures - Test methods - WithdrawelTimber structures - Test methods - Pull throughresistance of timber fasteners; German version EN1383:1999Touch and close fasteners - Cycling procedure forsubsequent testing (includes AmendmentTimber structures - Product requirements forprefabricated structural members assembled withFasteners - Tightening performance -Torque/Angle simplified test method; GermanFasteners; bolts, screws, studs and nuts; symbolsand designations of dimensioning (ISO 225:1983);Fasteners; clearance holes for bolts and screws(ISO 273:1979); german version EN 20273:1991Mechanical properties of fasteners; part 2: nutswith specified proof load values; coarse threadMechanical properties of fasteners - Part 7:Torsional test and minimum torques for bolts andscrews with nominal diameters 1 mm to 10 mmFasteners; surface discontinuities; bolts, screwsand studs subject to general requirements (ISO6157-1:1988); german version EN 26157-1:1991Fasteners; surface discontinuities; bolts, screwsand studs subject to special requirements (ISO6157-3:1988); german version EN 26157-3:1991Timber structures; joints made with mechanicalfasteners; general principles for the determinationof strength and deformation characteristics (ISOMechanical properties of fasteners; nonferrousmetal bolts, screws, studs and nuts (ISO8839:1986); german version EN 28839:1991Timber structures; testing of joints made withmechanical fasteners; requirements for woodTimber Structures - Test methods - Determinationof embedment strength and foundation values forAerospace series - Collars, swage locking,sheartype, in aluminium alloy 2024, anodized orchromated, metric series; German and EnglishBushings above 1 kV up to 36 kV and from 250 Ato 3,15 kA for liquid filled transformers -Constructional details of fasteningHand-held non-electric power tools - Safetyrequirements - Part 1: Assembly power tools forHand-held non electric power tools - Safetyrequirements - Part 13: Fastener driving tools;German version EN 792-13:2000Hand-held non-electric power tools - Safetyrequirements - Part 6: Assembly power tools forthreaded fasteners; German version EN 792-Timber fasteners - Specifications for connectorsfor timber (includes corrigendum AC:2000);German version EN 912:1999 + AC:2000Fasteners - Non-electrolytically applied zinc flakecoatings (ISO 10683:2000); German version ENISO 10683:2000Fasteners - Hot dip galvanized coatings (ISO10684:2004); German version EN ISO 10684:2004Adhesives - Determination of torque strength ofanaerobic adhesives on threaded fasteners (ISO10964:1993); German version EN ISO 10964:1997Conveyor belts - Determination of strength ofmechanical fastenings - Static test method (ISO1120:2002); German version EN ISO 1120:2002Methods of test for pallet joints - Part 1:Determination of bending resistance of palletnails, other dowel-type fasteners and staples (ISOFasteners - Preloading test for the detection ofhydrogen embrittlement - Parallel bearing surfacemethod (ISO 15330:1999); German version ENFasteners - Torque/clamp force testing (ISO16047:2005); German version EN ISO 16047:2005Passivation of corrosion-resistant stainless-steelfasteners (ISO 16048:2003); German version ENISO 16048:2003Fasteners - Quality assurance system (ISO16426:2002); German version EN ISO 14426:2002Fasteners - Acceptance inspection (ISO3269:2000); German version EN ISO 3269:2000Mechanical properties of corrosion-resistantstainless steel fasteners - Part 1: Bolts, screws andstuds (ISO 3506-1:1997); German version EN ISOMechanical properties of corrosion-resistantstainless steel fasteners - Part 2: Nuts (ISO 3506-Mechanical properties of corrosion-resistantstainless steel fasteners - Part 3: Set screws andsimilar fasteners not under tensile stress (ISOMechanical properties of corrosion-resistantstainless steel fasteners - Part 4: Tapping screwsFasteners - Electroplated coatings (ISO4042:1999); German version EN ISO 4042:1999Fasteners - Ends of parts with external metric ISOthread (ISO 4753:1999); German version EN ISOTolerances for fasteners - Part 1: Bolts, screws,studs and nuts; Product grades A, B and C (ISOTolerances for fasteners - Part 3: Plain washers forbolts, screws and nuts; product grades A and CFasteners - Surface discontinuities - Part 2: Nuts(ISO 6157-2:1995); German version EN ISOMechanical properties of fasteners made of carbonMechanical properties of fasteners made of carbonMechanical properties of fasteners made of carbonMechanical properties of fasteners - Part 6: NutsFasteners; Bolts, Screws, Nuts and Accessories,Terminology and NomenclatureFasteners; Width across Flats for HexagonProductsAerospace; fasteners for aerospace construction,bi-hexagonal wrenching configurationTechnical drawings - Simplified representation ofthe assembly of parts with fasteners - Part 1:Technical drawings - Simplified representation ofthe assembly of parts with fasteners - Part 2:Aerospace; fasteners, tolerances of form andposition for bolts and screws; identical with ISOAerospace; fasteners; tolerances of form andposition for nuts; identical with ISO 8788, editionFasteners - General requirements for bolts, screws,studs and nuts (ISO 8992:2005)英文名称